Licensing the Hardware under an Open Source License

I was wondering if the Printer’s Hardware could be licensed under an open source license aka Mach 3.0 Open Design Pledge http://mach30.org/about/mach-30-open-design-pledge/ kinda like this https://opendesignengine.net/projects/omnicam

We have a “Respects your Freedom” certification from the Free Software Foundation: http://www.fsf.org/resources/hw/endorsement/aleph-objects Most of our items are either GPLv3 or CC by SA. We are committed to Free & Libre hardware and software.

But shouldn’t open hardware have its own license http://www.kickstarter.com/projects/373493158/open-hardware-needs-a-sourceforge-of-its-own I have an interesting idea for a Kickstarter/Indiegogo Which is to improve this site opendesignengine.net maybe add github intergration.I think a github/sourceforge for hardware will help improve lulzbot printers.

The budaschnozzle at least is licensed under the Creative Commons - Share Alike license.
Also, many of the older parts are on github.
Old TAZ Freecad files
Incomplete TAZ Openscad files