New Guy here…
I’ve had decent success with my Taz 2 since I received it. About 50 prints, some good, some not…Then a new issue popPed up. Prints are starting to “lean”, or slant to the left or right as they get taller. It “chirps” a bit while printing and it looks like there is a bit of play in the smooth rod bushings (the print head moves a bit while moving left to right or vice versa). But if it were just excessive play, I would think the results would be more random. These prints pick a direction and lean that way until complete (or I interrupt).
Here are the .stl and .gcode files - real simple parts for a project - solid rectangle pieces - as the picture shows, they look more like parallelograms…
rectangle_generic.stl (684 Bytes)
rectangle_generic.gcode (416 KB)
Any help would be great!!! Thanks!!!