Taz 6 powering off during printing

We have had our Taz 6 for about 2 weeks now and things have been running great until today. Twice today the machine will run for 30 min to an hour, then shut off and restart. It is printing from the SD card, plugged into a surge protector, running IC3D ABS. I saw it happen the first time, and the 2nd I was away and went back with the machine fully cooled and the “Taz 6 ready” message on the screen.

Any help is appreciated on this.

My 2 cents worth…

Sounds like the power supply might be shutting down due to heat buildup! Check if the chassis/control box fan and the internal Power supply fan are running.

I will check on that in the morning.