Dual Extruder V3 hotend part?

So, if someone were to want to buy the dual hotend block from the new V3 dual extruder thingy, where might someone go to purchase said block? ALso any plans to have an ohai kit assembly document showing how it goes together?

Whew, that got out quick! Lets see what we can do!

Full source including drawings for all machined and metal parts: http://download.lulzbot.com/TAZ/accessories/tool_heads/LulzBot_TAZ_Dual_Extruder_v3/

Assembly OHAI: https://ohai.lulzbot.com/project/dual-extruder-v3/ (We had missed putting that live before the announcement, it can now be found in the misc section.)

Install OHAI: https://ohai.lulzbot.com/project/lulzbot-taz-dual-extruder-tool-head-v3-install/accessories/

We are currently trying to ramp up production on the v3 Dual, and at the moment using all components for production units. Once we get out inventory levels stabilized, we will be trying to carry the harder to find components such as hot ends, and the machined heat sink.

Cool, thank you! Looking forward to building one eventually!

The new design looks to have addressed the big issues with the V2.

With a little luck, effort, and skill, I hope I can convert my V2 to the better V3 design.

The side-by-side nozzle design should be a great improvement over the cantilevered design. No more leveling of T1…

We’ll have to see how the modified Aero-esque hotend will hold up to heat creep.

Definitely seems like a good upgrade.