Adapter for the Aerostruder V2 Micro..?

Have questions? Want advice?
Post Reply
Gringotuerto
Posts: 9
Joined: Thu Jan 04, 2018 11:02 am

Adapter for the Aerostruder V2 Micro..?

Post by Gringotuerto » Fri Nov 09, 2018 12:14 pm

I bought the 0.25mm tool head when it was first announced (2 months ago). But it is not compatible with either of the printers I have (Taz6 & Mini original version). The original press release said that an adapter for these other printers would be released "in the coming weeks," which implies "soon", although I suppose it can technically mean anything. Now the writeup for the toolhead just says the adapter is "in development," which does not imply any schedule at all. Is there any ETA on this?

B-Hep-Spring
Posts: 59
Joined: Fri Oct 12, 2018 11:55 am

Re: Adapter for the Aerostruder V2 Micro..?

Post by B-Hep-Spring » Tue Nov 13, 2018 10:54 am

I had also read about the Adapter plate :| which did state that they hoped it to be ready by mid September,, I have to say after purchasing the Taz 6 Im a little disappointed that the heads are in such a short supply... I was watching this head to purchase,, but obviously there are problems..

Brent.I
Aleph Objects | LulzBot
Posts: 511
Joined: Mon Jan 20, 2014 8:21 am

Re: Adapter for the Aerostruder V2 Micro..?

Post by Brent.I » Wed Nov 14, 2018 11:27 am

TAZ and Mini Adapter mounts for the new tool heads are now live! We should be receiving them into our warehouses over the next couple of days.

TAZ: https://www.lulzbot.com/store/accessori ... er-taz-5-6

Mini 1: https://www.lulzbot.com/store/accessori ... ter-mini-1

B-Hep-Spring
Posts: 59
Joined: Fri Oct 12, 2018 11:55 am

Re: Adapter for the Aerostruder V2 Micro..?

Post by B-Hep-Spring » Sat Nov 17, 2018 1:53 pm

Thanks for letting us know Mine is on order shortly :D

Post Reply