Minimum layer height

Have questions? Want advice?
Post Reply
Posts: 23
Joined: Tue Mar 24, 2015 10:18 pm

Minimum layer height

Post by Jeff0042 » Tue Dec 11, 2018 10:31 pm

I'm second guessing myself and I'd like to confirm this. My printer has a .35 nozzle. I seem to recall that the minimum layer one can print is half the diameter of the nozzle, so in my case it would be 0.175mm, however, the default cura settings generated for "fine" printing is 0.14. I also (vaguely) recall reading that I can print as low as 0.1mm layer height, which would negate the whole "the smallest layer height you can print is half the nozzle diameter" rule. What is the minimum I can print?



Posts: 1091
Joined: Sun Feb 01, 2015 3:53 pm

Re: Minimum layer height

Post by kmanley57 » Wed Dec 12, 2018 11:30 am

Well I have printed at a 0.1 MM layer before with a 0.5 MM nozzle, but it took a LONG time to finish. Plus it was only a non-flake/filled filament that I used. I think a number of factors determine a minimum height you can print. SO -- YMMV.
I will express my CRAZY ideas at any time! So you have been warned. None of my opinions are Lulzbots and can be wrong at any second.

Post Reply