"Lulzbot-ized" version of Cura 2.x?

Get answers & advice for all of your 3D printing & Free Software needs here!
Post Reply
John Mc
Posts: 347
Joined: Wed Dec 23, 2015 5:16 pm
Location: Vermont

"Lulzbot-ized" version of Cura 2.x?

Post by John Mc » Mon Apr 24, 2017 5:54 pm

Is there any word on when a "Lulzbot-ized" version of Cura 2.x (along with 2.x print profiles) is coming out?

coversplease
Posts: 1
Joined: Fri Apr 28, 2017 3:04 pm

Re: "Lulzbot-ized" version of Cura 2.x?

Post by coversplease » Fri Apr 28, 2017 3:08 pm

It's still in alpha. But the alpha has a lot of their current profiles in the latest April build so if you want to try it, it'll likely work with some expectation of risk.

zorrobyte
Posts: 40
Joined: Sat Mar 11, 2017 11:23 am

Re: "Lulzbot-ized" version of Cura 2.x?

Post by zorrobyte » Sat May 06, 2017 1:40 am

Alpha builds here:
http://devel.lulzbot.com/software/Cura2/

Currently the model viewer is not working on OS X and dual extrusion is missing, but have been using it on my Winblows machine just fine for single material prints.

John Mc
Posts: 347
Joined: Wed Dec 23, 2015 5:16 pm
Location: Vermont

Re: "Lulzbot-ized" version of Cura 2.x?

Post by John Mc » Sat May 06, 2017 4:43 am

Thanks. I think I'll wait a bit before really getting in to it, since I'd be running it mostly on a Mac.

Post Reply