Birth of new Taz 6 clone

Get answers & advice for all of your 3D printing & Free Software needs here!
User avatar
piercet
Posts: 3962
Joined: Sun Aug 25, 2013 1:37 am
Location: Battleground, WA
Contact:

Re: Birth of new Taz 6 clone

Post by piercet » Sun Jul 23, 2017 10:55 am

That could potentially be an electrical conductivity issue. Did you use thread locker or anything non conductive on the washers, the nozzle ground wire, or the harness? I'd double check the wiring and assembly here: https://ohai.lulzbot.com/group/taz-6/

it's possible you are in the wrong Z endstop plug, or maybe the switch on the bed isn't detecting the low point of the bed properly?

zedwizz
Posts: 10
Joined: Sat Jul 08, 2017 6:20 am

Re: Birth of new Taz 6 clone

Post by zedwizz » Mon Jul 24, 2017 1:43 pm

i will double check my wiring and report back.

zedwizz
Posts: 10
Joined: Sat Jul 08, 2017 6:20 am

Re: Birth of new Taz 6 clone

Post by zedwizz » Mon Jul 24, 2017 2:30 pm

In the control window do people get the same Eqn coefficients and planeNormal results everytime you print?

zedwizz
Posts: 10
Joined: Sat Jul 08, 2017 6:20 am

Re: Birth of new Taz 6 clone

Post by zedwizz » Sat Aug 05, 2017 10:21 am

So ,

Stepper motors changed for moon's and everything seems to be working as it should. Im a very happy man :D

Mini Taz next....? lol

rtimberman50
Posts: 7
Joined: Mon Jul 03, 2017 6:12 pm

Re: Birth of new Taz 6 clone

Post by rtimberman50 » Tue Aug 22, 2017 6:50 am

What power supply did you end up using? The one I purchased will not work without drilling more holes in the control box as they do not match the meanwell power supply screw holes.
I priced out a meanwell supply and might just purchase that even though they are not the cheapest it might just be the best solution moving forward.

Thanks!

Jtaylor5959
Posts: 1
Joined: Thu Jan 18, 2018 11:27 am

Re: Birth of new Taz 6 clone

Post by Jtaylor5959 » Thu Jan 18, 2018 11:31 am

This is fantastic, I was just looking into starting this project. Would you be willing to share your sources for the hardware? Rails, controller box, bed etc..? This is really really cool.

Also what is the overall price of your build?

Well done!

Post Reply