Humm, I used to be able to print wood graining with wood.py but I just can’t get it to work without the printer (Taz 6 w/ Merlin) refusing to start with a Heating failed message. It seems in the past that I could print and get great results even if the Heating failed message showed on Taz. Suggestions?
(from wood.py:)
Name: Wood
Info: Vary the print temperature troughout the print to create wood rings with some printing material such as the LayWoo. The higher the temperature, the darker the print.
…
author = ‘Jeremie Francois (jeremie.francois@gmail.com)’
date = ‘$Date: 2016/01/01 19:11:14 $’
license = ‘GNU Affero General Public License http://www.gnu.org/licenses/agpl.html’
My usage:
$ python wood.py --min 185 --max 280 -f new-lamp-top2.gcode