Hello,
My issue: How to set up Cura Lulzbot Edition v2.6.52 for a stock TAZ2 --except retrofitted 24V bed-- that is, single 35mm nozzle. Using generic ABS. I’m on MacOS 10.12.6 (Sierra).
Using the earliest TAZ profile (TAZ5) doesn’t cut it: Kinda looks like it tries to connect, then I get a “Wrong Machine” error message.
I really tried to figure this out, but there have been so many versions of so many components since my TAZ2 arrived… please bring me up to date. Using other s/w from the same Mac, I verified that the TAZ2 is fully functional.
TIA
