Attempting to properly scale a 3D model to certain architectural scales (1/4", 1/8", 1/16") and so far the only way I have been able to get it close to size is by using the STL Exporter > Units to mm > export, then, once it is in Cura, it comes out as a giant structure that is way too big to fit on the printing bed. After converting, the closest I have gotten (value wise) to getting them close to scale is:
1/4" = 2.08% Scale
1/8" = 1.04% Scale
1/16" = 0.52% Scale
These values are still off about 3" to scale (aka if I want a 40’ model to scale, it would come out 40’ 3"), so if anyone can shine some light on an easier/better way of getting them true to scale or the exact values it would be much appreciated. Thank you!