Page 3 of 3

Re: Issues with prints pausing after Cura and firmware update

Posted: Mon Dec 10, 2018 10:55 am
by Brent.I
amcbride wrote:
Sat Dec 08, 2018 5:29 pm
Currently using Cura 3.2.21 but will update after this post.
Let us know how it goes! You can get 3.2.32 from https://www.lulzbot.com/cura

All reports of pausing have been alleviated once we incorporated the fix in 3.2.29 but please let us know if you see otherwise.