Using multiple TAZ 5 printers with Cura for Ubuntu

We are running Cura for Ubuntu on a computer with Ubuntu 18.04 installed. The TAZ 5s are connected via separate USBs. We created two different printer profiles. We open one Cura window and connect the first printer. When we open the second and connect the second printer the first instance of Cura also connects to the second printer making it impossible to run two separate jobs at once. What troubleshooting steps should be taken?

You will need to go into the machine settings for each printer and change the serial port from AUTO to the port that each printer is connected to in their respective profiles.

That should be the only thing that you will need to do if I’m not mistaken.

That works. Very easy to set.