A0-100 Stopped Connecting to Cura

Get answers & advice for all of your 3D printing & Free Software needs here!
Post Reply
Posts: 2
Joined: Sun Nov 11, 2018 4:56 pm

A0-100 Stopped Connecting to Cura

Post by commandosam1 » Sun Nov 11, 2018 5:06 pm

I received a pair of A0-100 printers for free, that didn't work. I was able to combine parts from both to make one work and everything was fine. That was a couple years ago, and now after many months of not touching the printer I can't get it to connect to cura. When I click connect, it just says "connecting" forever. Any advice would be really helpful, and I will gladly provide more information if you have questions.

Aleph Objects | LulzBot
Posts: 491
Joined: Mon Jan 20, 2014 8:21 am

Re: A0-100 Stopped Connecting to Cura

Post by Brent.I » Mon Nov 12, 2018 4:14 pm

The first item to check will be that you have your baud rate and port set correctly in Cura. The A100 used 115200 baud rate if I recall correctly. You can also try to connect via pronterface, as that is what we were recommending when selling the AO series of printers.

Post Reply