Fraction Disk

Learn By Doing With These 3D Models
Post Reply
gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Fraction Disk

Post by gyukish » Thu Jul 20, 2017 2:36 pm

Link: https://www.thingiverse.com/thing:1343038
License: CC BY 3.0
Grade Level: K-6
Courses: Math

This model is a pie chart with fractions on them to help visualize the amount of a fraction.
Pie_Chart.JPG

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Bottom Pin

Post by gyukish » Thu Jul 20, 2017 2:38 pm

Link: https://www.thingiverse.com/thing:1343038/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Math

This is the bottom pin model of the pie chart. This model will take about seven minutes to print on high speed.
Bottom_Pie.png
Bottom_Pie.png (3.45 KiB) Viewed 898 times
Last edited by gyukish on Thu Jul 20, 2017 2:41 pm, edited 1 time in total.

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Inner Fraction Disk

Post by gyukish » Thu Jul 20, 2017 2:40 pm

Link: https://www.thingiverse.com/thing:1343038/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Math

This is the inner fraction disk model for the pie chart. This model will take about forty-five minutes to complete on high speed.
Inner_Disk.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Outer Fraction Disk

Post by gyukish » Thu Jul 20, 2017 2:41 pm

Link: https://www.thingiverse.com/thing:1343038/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Math

This is the outer fraction disk model for the pie chart. This model will take about forty-five minutes to complete on high speed.
Outer_Disk.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Top Pin

Post by gyukish » Thu Jul 20, 2017 2:41 pm

Link: https://www.thingiverse.com/thing:1343038/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Math

This is the top pin model of the pie chart. This model will take about five minutes to print on high speed.
Top_Pin.png
Top_Pin.png (3.81 KiB) Viewed 896 times

Post Reply