What material is the TAZ 6 flexible bed corners ?

A forum dedicated to the stock LulzBot TAZ 3D Printer
Post Reply
dorifuto.boi
Posts: 11
Joined: Fri Jun 03, 2016 4:42 am

What material is the TAZ 6 flexible bed corners ?

Post by dorifuto.boi » Sat Jan 26, 2019 8:47 pm

Hey guys, My TAZ 6 is starting to get gaps between the top of its glass plate and the bottom of its bed corner washers. Im going to reprint the bed corners to see if that fixes the problem but I couldn't find what flexible material it they are made out of. Does anyone know ?

Thanks for your time,
David

kmanley57
Posts: 1106
Joined: Sun Feb 01, 2015 3:53 pm

Re: What material is the TAZ 6 flexible bed corners ?

Post by kmanley57 » Sun Jan 27, 2019 1:19 am

Well the print file says Ninjaflex.
I will express my CRAZY ideas at any time! So you have been warned. None of my opinions are Lulzbots and can be wrong at any second.

dorifuto.boi
Posts: 11
Joined: Fri Jun 03, 2016 4:42 am

Re: What material is the TAZ 6 flexible bed corners ?

Post by dorifuto.boi » Sun Jan 27, 2019 8:01 am

kmanley57 wrote:
Sun Jan 27, 2019 1:19 am
Well the print file says Ninjaflex.
Thanks kmanley57 ! Do you mean the file name ? My print file name only says "bed_corner_taz6_v2". Can you tell me where you found Ninjaflex ? That way I won't have to bother you guys about the material of any other parts in the future :D

kmanley57
Posts: 1106
Joined: Sun Feb 01, 2015 3:53 pm

Re: What material is the TAZ 6 flexible bed corners ?

Post by kmanley57 » Sun Jan 27, 2019 12:09 pm

I looked at the gcode file on the devel.lulzbot.com site in the production parts directory for the printer Model for that release of printer. :geek:
I will express my CRAZY ideas at any time! So you have been warned. None of my opinions are Lulzbots and can be wrong at any second.

dorifuto.boi
Posts: 11
Joined: Fri Jun 03, 2016 4:42 am

Re: What material is the TAZ 6 flexible bed corners ?

Post by dorifuto.boi » Sun Jan 27, 2019 2:08 pm

kmanley57 wrote:
Sun Jan 27, 2019 12:09 pm
I looked at the gcode file on the devel.lulzbot.com site in the production parts directory for the printer Model for that release of printer. :geek:
Found it ! Thanks for your time.

ritmopat
Posts: 100
Joined: Wed Feb 13, 2019 9:22 am

Re: What material is the TAZ 6 flexible bed corners ?

Post by ritmopat » Wed Feb 20, 2019 9:45 pm

i was thinking about having my machinest make me some out of alum!...then use machinest shims under each foot to adjust the ‘z’

Post Reply