nozzle never touching washers

A forum dedicated to the stock LulzBot Mini 3D Printer
Post Reply
shuggins38
Posts: 1
Joined: Wed Aug 07, 2019 4:56 pm

nozzle never touching washers

Post by shuggins38 » Wed Aug 07, 2019 5:15 pm

my print nozzle never touches the washer to start the bed leveling off the noozle position is slightly behind the rear left washer. it wiped fine but never touched and i get wipe nozzle failed and tells me to cleans the nozzle which is brand new and it has been cleaned over and over as i hadnt got it past this point yet.

tyth
Aleph Objects | LulzBot
Posts: 12
Joined: Mon Mar 20, 2017 10:43 am

Re: nozzle never touching washers

Post by tyth » Thu Aug 08, 2019 9:32 am

It sounds like your x-axis may be a bit unlevel and unable to reach that corner.
Follow this guide to get that fixed: https://ohai.lulzbot.com/project/leveli ... e-repairs/

It's for a TAZ6 but the process is the same.

Slicedbread
Posts: 4
Joined: Fri Jul 13, 2018 1:45 am

Re: nozzle never touching washers

Post by Slicedbread » Thu Aug 08, 2019 11:09 am

Is this a mini 1 or 2?

Post Reply