Marlin Source for Quiver

Look here for custom firmware, networked 3D printer hosts like OctoPrint, and more!
Post Reply
coloradocaleb
Posts: 17
Joined: Thu Jul 17, 2014 2:26 pm
Location: Colorado
Contact:

Marlin Source for Quiver

Post by coloradocaleb » Wed May 16, 2018 3:29 pm

Is there a spot on devel for the firmware? I'm guessing one of the TAZ 7 Aerostruder files on http://devel.lulzbot.com/software/Marlin/ would work? Seems like the hardware files haven't been updated in a minute so I'm looking at printing the Z + X parts to start modifying my 24v Taz 1 (taking the smooth rods from the X to put on the Z then grabbing the other parts then commenting out autoleveling, wipe, LCD, adding in endstops, etc)

Brent.I
Aleph Objects | LulzBot
Posts: 385
Joined: Mon Jan 20, 2014 8:21 am

Re: Marlin Source for Quiver

Post by Brent.I » Thu May 17, 2018 7:28 am

The pre-compiled hex files can be found at the devel location that you linked. You can find all our source code for Marlin here: https://code.alephobjects.com/project/profile/6/

At the moment, the Quiver firmware is still in flux and could be a little while until we have a final version for Quiver. YMMV!

Post Reply