Mini 1 to 2 Conversion

A forum dedicated to the stock LulzBot Mini 3D Printer
OutcastZeroOne
Posts: 31
Joined: Mon Apr 17, 2017 11:40 am

Re: Mini 1 to 2 Conversion

Post by OutcastZeroOne » Fri Jul 13, 2018 9:40 pm

never ship anything via UPS. my parts where sopposed to be here Wednesday, sopposidly no one was at my place to sign for the stuff. So now UPS has a 1 try to deliver to your place policy then its off to a UPS store that closes when most people get off work. So now I can get my parts till Monday. Never ship anything UPS.

OutcastZeroOne
Posts: 31
Joined: Mon Apr 17, 2017 11:40 am

Re: Mini 1 to 2 Conversion

Post by OutcastZeroOne » Sat Jul 14, 2018 6:41 pm

Decided I wanted to keep my original build plate for just in case. Went to a local glass shop and had some new plates cut. Right thickness too. Decided I’d be a little fancy with it and got some nice swirly green. Not Lulzbot green, but still green. It’s nice and flat too.
Attachments
3B22AF66-694B-4987-A02E-8FDC9096FDD5.jpeg
C1F7F09D-5E78-4DF9-865F-54A8E9E32620.jpeg

OutcastZeroOne
Posts: 31
Joined: Mon Apr 17, 2017 11:40 am

Re: Mini 1 to 2 Conversion

Post by OutcastZeroOne » Sun Jul 15, 2018 12:45 pm

I came across a model for a "Beefy Extruder mount" but it looks unfinished as I see no mount for the drag chain. Any info on this design? Seeing as I plan to go water cooled I think it may be a better option for me

Post Reply