Mini 2 Marlin Firmware Download?

Get answers & advice for all of your 3D printing & Free Software needs here!
Post Reply
DPmakestuff
Posts: 4
Joined: Tue Jul 10, 2018 4:57 pm

Mini 2 Marlin Firmware Download?

Post by DPmakestuff » Fri Jul 13, 2018 1:12 am

I've scoured the internet and look on http://download.lulzbot.com/, but they only offer .hex and .config files for download. On the Mini download page, there is a zip file with a complete Marlin package.

The second part of this is a shot in the dark but maybe someone could offer a solution on how to make use of a .hex file that I want to modify a little. Basically, I'm stuffing an Einsy Retro in my original Mini and need to smash the firmware together to make it work properly.
Last edited by DPmakestuff on Fri Jul 13, 2018 5:07 pm, edited 1 time in total.

User avatar
NBradshaw
Aleph Objects | LulzBot
Posts: 11
Joined: Mon Sep 26, 2016 10:46 am

Re: Mini 2 Marline Firmware Download?

Post by NBradshaw » Fri Jul 13, 2018 8:00 am

It sounds like you are looking for the code page for marlin, which you can find here: https://code.alephobjects.com/diffusion/MARLIN/
I'm not sure how you can go about editing firmware, but I hope that this gets you started on the right path.

DPmakestuff
Posts: 4
Joined: Tue Jul 10, 2018 4:57 pm

Re: Mini 2 Marline Firmware Download?

Post by DPmakestuff » Fri Jul 13, 2018 8:50 am

So I've found that page before, but I can't figure out how to download the whole package. I can find/download a complete (multiple tabs in Arduino) for the Mini, but I can only find/download bits and pieces for the Mini 2.

Maybe I don't fully understand how to use the https://code.alephobjects.com/diffusion/MARLIN/ website and it's just sitting there waiting for me, but I can't figure it out.

kmanley57
Posts: 1013
Joined: Sun Feb 01, 2015 3:53 pm

Re: Mini 2 Marline Firmware Download?

Post by kmanley57 » Fri Jul 13, 2018 11:03 am

Do a forum search on "git", that is how/what you will 'clone' the files/directories you need from there. I use the smartgit program myself.
I will express my CRAZY ideas at any time! So you have been warned. None of my opinions are Lulzbots and can be wrong at any second.

DPmakestuff
Posts: 4
Joined: Tue Jul 10, 2018 4:57 pm

Re: Mini 2 Marlin Firmware Download?

Post by DPmakestuff » Fri Jul 13, 2018 5:09 pm

Thanks for the help. I just spend a couple hours trying to muddle my way through to get it cloned but can't figure out how. Might be above my pay grade. I'll try again tomorrow.

Post Reply