Gettin Ready!

Show off your stuff!
Post Reply
ritmopat
Posts: 97
Joined: Wed Feb 13, 2019 9:22 am

Gettin Ready!

Post by ritmopat » Fri Feb 15, 2019 1:04 pm

Leveled my printer, locked it to the wall, table is all locked down solid!... as they say a monkey could hang off that, and this monkey probably will...
anyway added the 'led light option' glad I did..this is my first 3d printer so I wanted to make everything real solid I might be crankin things up later so just in case!
Attachments
IMG_1240.JPG
IMG_1238.JPG
IMG_1237.JPG
IMG_1235.JPG
IMG_1234.JPG
IMG_1232.JPG

kmanley57
Posts: 1105
Joined: Sun Feb 01, 2015 3:53 pm

Re: Gettin Ready!

Post by kmanley57 » Fri Feb 15, 2019 2:45 pm

Really would not mount to the wall. There is a good reason it has rubber feet on it.
I will express my CRAZY ideas at any time! So you have been warned. None of my opinions are Lulzbots and can be wrong at any second.

ritmopat
Posts: 97
Joined: Wed Feb 13, 2019 9:22 am

Re: Gettin Ready!

Post by ritmopat » Fri Feb 15, 2019 2:58 pm

the rubber feet did not all touch the table and the machine was not level to my liking (see shims).... the top support is to help stabilize the top from vibrations as it runs..my way of doing things I'm anal like that!..... that way I can sleep better knowing . it's not mounted to the wall... the bars are tieing it into the wall making it solid! needed or not it got it!

Post Reply