Printer can't hold temperature as set

Have questions? Want advice?
Post Reply
ZaganTheSpace
Posts: 1
Joined: Tue Apr 30, 2019 1:56 am

Printer can't hold temperature as set

Post by ZaganTheSpace » Tue Apr 30, 2019 2:14 am

Hello!

I started to print Nylon with Taz6 and every time I do it, the temperature will drop from 255-250 to 225-235 after 15 min. into printing.
My bed is heated to 60°C and fans are to 40%

I start these prints when I leave work and sometimes in the morning temperature is back to 255 at the end of the print.
I use S3D as a slicer and I tried different settings but no change.

These problems don’t exist with other filaments, only Nylon.
Also, on my last print there are some extrusion problems due to temperature? (Printed as shown in the photo)

If you have any other questions feel free to ask.
Attachments
IMG_20190430_100732.jpg
IMG_20190429_184549.jpg

Strelok_401
Posts: 3
Joined: Sat Apr 20, 2019 12:53 pm

Re: Printer can't hold temperature as set

Post by Strelok_401 » Tue Apr 30, 2019 2:18 pm

I'm worried with these temperature issues, it seems like it's a common problem for users (and that seems to be quite problematic for other 3D printers as well, according to the forums and reviews I read before buying a TAZ 6)... and the thing is that I was planning to move abroad and buy one of these houses in Greece, where temperatures will be high for a significant chunk of the year.
Last edited by Orias on Wed May 01, 2019 7:36 am, edited 1 time in total.
Reason: Spammy link

Post Reply