bestazy
January 15, 2018, 12:05pm
69
I am new to 3D printing and my new Taz 5 is my first experience. For space considerations my earliest prints were brackets to mount the filament 1kg spools on top of the frame dropping directly to the center of the build plate without Bowden tube. Therefore the print head is pulling the filament but with drag from the plastic tube of the spool mount. Should I try to mount the spools on bearings to reduce drag or include a Bowden tube, or?
Check this topic mate.
Greetings,
Writing to this forum in hope of possible solution.
I purchased my initial TAZ 6 unit on 14th of December from Microcenter. After installing the printer, I produced a roctopus print with NGen Standard Cura Profile which had slight ringing on the surface.
Right after that I started to get familiar with ABS and produced a 3d Benchy printed with standard ABS profile with local ABS fillament supplier. Once first ABS print was done, I noticed more pronounced ringing same as NGen’s roctp…
Can help you decide what you want.Do not thank to me.
