I have a Taz5 with the V2 hexagon hotend (.35mm Nozzle) and would like to enable the “print one at a time” setting rather than the “Print all at once” default and Cura needs to know the machine settings shown below. I’m not sure where to get them. As long as I’m admitting my ignorance here, I may as well state that I’m not sure precisely what these settings actually mean. 
Any assistance will be most appreciated.
I guess it’s in this order:
Distance between nozzle center axis to the outermost left print head edge along X.
Distance between nozzle center axis to the outermost rear print head edge along Y.
Distance between nozzle center axis to the outermost right print head edge along X.
Distance between nozzle center axis to the outermost front print head edge along Y.
Distance of print bed to lower X axis rod when Z is homed.
Try and prepare to stop the print if neccesary…
Maybe this post:
https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/11
Ah. thank you! I’ll give those numbers a shot.
Trying to find specific information from the search function works so much better when the correct terminology is used.
I find Google better for searching forums than a forums own search tool. It’s less picky and gives broader results.