Print Resolution for Little Octopus That Comes With New Taz?

Hi everyone,

I just purchased a Taz 4 and I was wondering, if anyone knows the resolution - or even better, what settings the little octopus - the one that came with the printer, was used to obtain such quality? I leveled the bed and went to print the octopus when I noticed that it was a different size (larger,) and with a lower resolution as the little octopus that came with the printer!

I’ve attached a couple of pictures so you can see what I’m talking about…


And here’s what I printed next to the little guy:

Thank you in advance!

Frank J. Guthrie
www.710films.com
frank@710films.com

I think it is this one:

http://download.lulzbot.com/TAZ/4.0/novelties/octopus/Small-octopus-ABS-.35noz-TAZ.gcode

Which has a layer height of 0.14mm.

This is the STL:

http://download.lulzbot.com/TAZ/4.0/novelties/octopus/octopus_v18_yeoldebrian.stl

Thank you Jebba!

I will give it a try (printing it) once I finish this big print that I have going on my Taz!

Do you think it was achieved with a 0.35mm nozzle or that a 0.25mm nozzle along with thinner filament were used?

Thank you in advance!

Frank J. Guthrie
www.710films.com
frank@710films.com