TAZ 6 Heating Failed

[woody]

Taz 6 Refurbishment E1 Heating Failed

I’m currently trying to refurbish an old Taz 6 for my local Library to use in their 3D print lab. The thing was a frankenstein and I spent alot of time getting it into shape (ie, rewiring, swapped entire hot end, etc). I was finally able to get one print done without any issues. I went to print another and I started getting the E1 error. I’m using a single, SE 0.5mm toolhead. I’ve checked all the things I can (wiring, continuity, resistance checks, voltages, etc). I even verfied the thermistor …

Good! I did replace many molex connectors as well, which was a pain itself. I just posted a topic of my own, link above. I think it comes down to a firmware issue. All the individual checks seems to come out sat.