Taz 6 OEM profile for OrcaSlicer (Testers, please?)

General Software
1

I’ve had some downtime at work, so I spent some time putting together a profile for a bone-stock Taz 6. Problem is, I no longer have one. But I was hoping somebody there could test this out.

The only part that I’m really unsure of is how well the wiping will work with the temps specified. They’re simple static temperature reductions from the print temps in the filament profiles, as opposed to the tuned temperatures from Lulzbot’s official Cura Profiles.

I have not tried to optimize speeds (because I don’t have a standard extruder to test with), so I used the speeds from Lulzbot’s Cura profiles. I only included 2.85mm PLA as a filament as well.

So if somebody wants to test and report back, I’d appreciate it!

Google Drive link: Lulzbot Taz 6 OEM.orca_printer - Google Drive

2

I have a stock TAZ 6 and am willing to do some testing but I may need some help getting your profile installed.

3

I’m looking into a good way to import, I’m going to de-list this post and find the best way. I can get the print profiles over, but the printer config with startup GCODE and such, doesn’t seem to want to come over.

Looks like there’s no simple way to just export mine and import, so I’m going all in, and making something compatible for potential inclusion in a future Orca release.

If work stays slow, this shouldn’t take too long.