Discrepancy in Cura Profile temps

https://www.lulzbot.com/mini-cura-profiles

Most of the profiles on this page say one temp, For example Allow 910 says 235 C, but when you click the profile it actually says 250 C inside the profile.

15C is a pretty big difference, What is actually recommended? The text on the webpage or the text in the profiles?

Thanks

Taulman’s web site recommends 250-255 for Alloy910. I use 250 with good results.

Based on those two data points, I’d say Lulzbot’s Cura profile is correct (250C) and the accompanying text on their web site needs an update.