New Taz 5 Owner unboxing experience

[Wolfie]

@kcchen_00

That dial gauge holder looks good also… would require the toolhead to be removed. But on the plus side the carrier would allow control of X-axis movement.

Bed Leveling using a Digital Indicator

Ok, I have seen a few confusing things asked about leveling the bed using a digital indicator. I will try to clear up a few things for you. First there are two attachment points you can use. One is the rail. This one attaches to the X rails. Nice concept but has a flaw. You have to remove it to put it on the other side of the print head. Could possibly introduce error. Plus its putzy. The second attachment is in the print carriage itself. You do not need to remove it to move to eac…

You don’t need to use the motors. Simply disable them in the driver or on the LCD and slide the bed and carriage by hand. Far faster. Far easier.