Overhang Spurs- Taz 5

Hi,

I’m having trouble reprinting a model that I’ve successfully printed a couple of days ago using Lulzbot ABS and the Taz 5. No settings have been changed between the two prints- I printed a few simpler models in between, and am just now starting to have issues with the quality of the overhangs. I’m using the default ABS profiles in Cura, running the extruder at 235C and the bed at 85C. I have re-leveled the bed and checked the extruder calibration, per this link https://ohai.lulzbot.com/project/extruder_calibration/calibration/.

The print on the left was the first print that required no clean-up. The print on the right is what has been happening since.

Any help is appreciated.
Thanks!