Sweet! Nice work!
Now you can maybe look into upgrading the case fan 
https://forum.lulzbot.com/t/case-fan-upgrade-tutorial/2940/1
Sharing is caring, just in case anyone cares, this is what I did for the case fan…
https://www.amazon.com/gp/product/B005C31GIA/
https://www.amazon.com/gp/product/B00Q48BRFO/
Fun fact, the higher the voltage the fan receives, the faster it spins… While 24 will kill it, 14 is totally okie dokie… 
AllenBW have any pics of how you have that setup hooked up in electronics enclosure?
Yeah!! @B4DWolf, will upload some photos in a bit… sorry for the delayed response… the tl;dr is … just hook up the regulator inline with existing fan, screw it down anywhere yah find free.
Ok ok a little late… but I was doing some work…
This is what i was working on…
Ribbon cable freely flopping out gives me the creeps, so webcam is tethered via hdmi… still need to work on webcam mount, as it is not sufficiently rigid
[user=873]@imxron[/user] Pictures are gone and so is the link to postimg.org you supplied to fix that problem.
Was just about to start this project and noticed…
It was bound to happen, sorry! I put a new Google link to the original post. Let me know if it works.