TAZ 6 print not moving forward after completion

General LulzBot TAZ
1

Hello,

I just finished my second print on the TAZ 6, and the print bed has not moved forward and it has been sitting there in the back position for 2 1/2 hours. The nozzle temp is currently 20 degrees and the bed/ print temperature is 45 degrees on both. It was a large print that took 30hrs.

Any assistance would be greatly appreciated.

o/

2

Paste your End G-code from your print so we can take a look at make sure it’s not something simple as an error in the ending Gcode.