Workhorse Bed is not level after bed levelling

[Edge]

Your hot end is likely gummed up with plastic preventing a solid zero. see:

Workhorse won't print Amazon ABS

“The print head does its thing, but no filament comes out.” That usually means a clog. Also, it’s possible you have not fed enough filament into the toolhead for the mechanism to extrude. The thing about troubleshooting these challenges with new 3D printer folks is that most of the challenges with prints are the user’s inexperience - speaking from experience. It took me awhile to learn my machine, tricks and troubleshooting my setup to get good prints. I am currently about 99% successful fi…