I have attached a .zip file which contains the default wipe code (CuraTAZ6Wipe.gcode) and a modified TAZ 6 wipe code (CuraTAZ6Wipe3.gcode) for the Single Extruder V2.1 and the Aerostruder. The modified wipe code uses more of the triple wide pad that is shipped with the Dual Extruder V3.
Warning: Do not modify the wipe code for any of the single extruders unless you have the triple wide pad as this modified code will hit the sides of the original single wide pad holder.
The attached files are usable as is. They will zero XY, then Z, wipe the nozzle, and quit. However, you probably want to edit the start gcode you are using replacing the lines between the comments “move above wiper pad” and “raise extruder”.
WideWipe.zip (1.01 KB)